微信:
  • 惠生集團

  • 惠生工程

  • 惠生海工

招賢納士

  • 職位:Electrical Engineer

    直接上級:

    工作地點:上海

    【職位描述】:

    1. 承擔電力系統布置圖、照明系統布置圖、主干電纜布置圖、監測報警系統圖等電儀專業圖紙的設計、繪制和校審;
    2. 承擔電力負荷計算等電儀專業各類計算并編制報告;
    3. 承擔本專業各類設備的采購技術談判和編制技術文件;
    4. 協調各專業間技術問題和設計優化;
    5. 支持并參與3D建模;
    6. 及時處理船級社和業主審圖意見;
    7. 掌握和學習相關規范規則并應用。

     

    【任職資格】:

    1. 大學本科及以上
    2. 七年以上船舶及海工設計、工藝技術的經歷
    3. 英語聽說讀寫基本流利

     

    【數量】:2

     

    投遞簡歷請發送至郵箱: [email protected]

  • 職位:Instrument Engineer

    直接上級:

    工作地點:上海

    【職位描述】:

    1.Preparation of the design philosophy and project specification.
    2.Monitor instrument design engineering and drafting to ensure fit for purpose design in accordance with BUYER, CLASSIFICATION SOCIETY and BUILDER requirements.
    3.Monitor instrument manpower requirements against project schedule and deliverables to ensure timely completion. Monitor and report progress.
    4.Manage the interface and coordinate transfer of design data to process, mechanical, piping and procurement/estimating groups.
    5.Preparation of I/O count and technical Specification and RFQ for procurement.
    6.Preparation of Material Take-off quantities.
    7.Coordinate study of techniques required for integrity monitoring of the topside and hull. 
    8.Coordinate instrumentation and control inputs from makers.

     

    【任職資格】:

    1. Four year academic degree in engineering or business from an accredited university or equivalent experience combined with academic accomplishments. With skilled project experience of topside instrument design in offshore(required) and onshore(option) oil & gas 
    2. Bilingual Chinese and English read/write/speak preferredindustry.

     

    投遞簡歷請發送至郵箱: [email protected]

  • 職位:Process Engineer

    直接上級:

    工作地點:上海

    【職位描述】:

    1.Experience in an operational LNG Export facility. 
    2.Experience in a project commissioning phase for an LNG facility. 
    3.Experience in Pre FEED, FEED and EPC Phases of a project, preferably on the same project. 
    4.Experience in reimbursable and lump sum EPCIC contracting schemes. 
    5.Proficient in reviewing process engineering calculations i.e. mass and energy balances, hydraulics, equipment sizing and ratings, relief calculations etc. 
    6.Experience with process system control design and development of control philosophies.
    7.Experience in the use and application of process simulation software. 

     

    【任職資格】:

    1.Bachelor's degree in Chemical Engineering
    2.Minimum 15 years' experience in process facilities design for LNG liquefaction and gas pre-treatment processing
    3.Fluent in English

     

     

    投遞簡歷請發送至郵箱: [email protected]

  • 職位:Marine system Engineer

    直接上級:

    工作地點:上海

    【工作職責】
    1.Monitor mechanical and piping design engineering and drafting to ensure fit for purpose design in accordance with BUYER, CLASSIFICATION SOCIETY and BUILDER requirements.
    2.Monitor M&P manpower requirements against project schedule and deliverables to ensure timely completion. Monitor and report progress.
    3.Coordinate transfer of M&P design data to general, structure, E&I, and procurement/estimating groups.
    4.Coordinate machinery space arrangement in GA.
    5.Perform system diagram design such as Fuel Oil Transfer And Purification, Fuel Oil Supply, Dirty Oil Drain SW Cooling, Marine Growth Protection, FW Cooling, Cooling System,, CCR, Elec. Equipment Room & Instrument, Control Air For Pneumatic Fire, Exhaust Piping, 6.Ballast and Bilge, High Pressure Water Clean, Fresh Water Service, Sanitary Water (Hot & Cold)and Discharge, Sewage Treatment , Oxygen And Acetylene, Fire Hydrant  for Hull and  Topside Platforms and etc.( Key execution experience required) 
    6.Perform or supervise Calculation of Machinery Equipment.
    7.Perform or coordinate preparation of Machinery Arrangement.6.Perform or supervise Calculation of Machinery Equipment.
    8.Coordinate cargo (including cargo process) system study.
    9.Perform or coordinate preparation of Machinery Arrangement.6.Perform or supervise Calculation of Machinery Equipment.
    10.Coordinate preparation of machinery equipments purchasing order specification.
    11.Coordinate the machinery equipment technical negotiation with the supplier and signature TA.10.Coordinate preparation of machinery equipments purchasing order specification.
    12.Coordinate marine systems and the interface to cargo systems.
    13.Preparation of Material Take-off quantities for pipes, valves and other accessories.
    14.Coordinate the machinery equipment installation.

    【任職要求】
    1. Four year academic degree in engineering or business from an accredited university or equivalent experience combined with academic accomplishments.
    2. Bilingual Chinese and English read/write/speak.

     

    投遞簡歷請發送至郵箱: [email protected]

开元棋牌通比牛牛都是输 河北11选5走势 美东2分彩是正规彩票吗 11选5走势图北京 期货配资对交易有哪些影响 今日实时大盘上证指数 北京十一选五结果查询 南京毅力期货配资 哪个app有辽宁十一选五 安徽11选五综合走势图 股票数据分析